|
产品
压力调节阀
减压阀 溢流阀 滑闸阀 爆管保护阀 流量和压差调节阀 真空破坏和调节阀 安全阀 先导式调节阀门
通排气阀
冷凝水排水阀
浮球阀
容器内安装的浮球阀 容器上安装的浮球阀 管路上安装的浮球阀
管路元件
除尘器和过滤器 液体分离器 流量显示器/视孔玻璃 流量监测器 止回阀
泵
设定阀
备件和配件
真空破坏和调节阀
Vacuum Breaker with Setting Scale
VV 34, 35, 36
With spring cap (CrNiMo steel) and setting scale, VV 35 screw-in version | VV 36 without spring cap and setting scale | suitable for liquids and gases | body made of CrNiMo steel, flange of steel, CrNiMo steel | available in special materials, e.g. seawater resistant material, NACE compatible | nearly universally usable
DN
20 - 250
G
1/2A - 2 1/2A
PN
6 - 40
p2
0.05 - 0.95 bar
Kvs
1.2 - 388 m3/h
T
300 °C
安全阀
Normal or Full Lift Threaded Valve
SV 29
Spring-loaded normal safety valve | suitable for liquids, gases and steam | body made of 1.4104, 1.4404
G
1/2A x 1/2
3/4A x 1/2
PN
40 - 400
p2
0.3 - 330
T
200 °C
Full Lift Threaded Valve
SV 29V
Spring-loaded full lift safety valve | suitable for liquids, gases and steam | body made of 1.4104, 1.4404
G
3/4A x 1
1A x 1 1/2
PN
40 - 250
p2
0.3 - 200 bar
T
200 °C
Normal and Proportional Valve
SV 4, 40
Spring-loaded, SV 4 with closed spring cap, SV 40 with open spring cap for steam / body made of GG-25, GS-C 25, CrNiMo steel
DN
15 - 150
PN
16 - 40
p2
0.5 - 40 bar
T
200 °C
Full Lift Safety Valve
SV 6, 60
Spring-loaded, SV 6 with closed spring cap, SV 60 with open spring cap for steam / body made of GG-25, GS-C 25, CrNiMo steel, welded steel.
DN
25/40 - 150/250
PN
16 - 40
p2
0.5 - 40 bar
T
200 °C
先导式调节阀门
Pilot-operated pressure reducing valve
RP 115
Pilot-operated pressure reducing valve for high flow rates | specially developed for drinking water Applications | body made of GGG-40 Epoxy coated, meets the KTW recommendation of the German Ministry for Health | adjustable closing, opening and response speed
DN
50 - 400
PN
16
p1
up to 16 bar
p2
1.5 - 15 bar
Kvs
45 - 1550 m3/h
T
70 °C
Pilot-operated Backpressure Regulator
RP 116
Pilot-operated backpressure regulator for high flow rates | specially developed for drinking water Applications | body made of GGG-40 Epoxy coated, meets the KTW recommendation of the German Ministry for Health | adjustable closing, opening and response speed
DN
50 - 400
PN
16
p1
1,5 - 15 bar
Kvs
45 - 1550 m3/h
T
70 °C
Pilot-operated Pressure Reducing Valve
RP 810
Cast steel pilot-operated pressure reducing valve for large flow rates at high pressure | suitable for liquids and steam | body made of GGG-40, GS-C 25, CrNiMo steel | maintenance work can be done from above at the installed valve, special versions available
DN
40 - 400
PN
16 - 160
p2
1 - 40 bar
Kvs
20 - 900 m3/h
T
130 °C
Pilot-operated Pressure Reducing Valve
RP 814, 815
Pressure reducing valve of the inline design in welded construction, pilot-operated inline valve for large flow rates | RP 815 with extended casing for maximum Kvs-values, high pressure at large flow rates | body made of welded steel, CrNiMo steel | special versions available
DN
100 - 800
PN
16 - 25
p2
1 - 20 bar
Kvs
60 - 2100 m3/h
T
130 °C
Pilot-operated Sliding Gate Valve
RP 818
Sliding gate, intermediate flange connection / suitable for liquids and gases / body made of C-steel, CrNiMo steel / saves installation expenditure / reduces costs
DN
65 - 150
PN
10 - 40
p2
0.02 - 10 bar
Kvs
58 - 331 m3/h
T
130 °C
Pilot-operated Backpressure Regulator
RP 820
Cast steel pilot-operated backpressure regulator for large flow rates at high pressure | suitable for liquids and gases | body made of GGG-40, GS-C 25, CrNiMo steel | maintenance work can be done from above at the installed valve, special versions available
DN
40 - 400
PN
10 - 63
p1
2 - 40 bar
Kvs
20 - 900 m3/h
T
130 °C
Pilot-operated Backpressure Regulator
RP 824, 825
Backpressure regulator of the inline design in welded construction, pilot-operated inline valve for large flow rates | RP 825 with extended casing for maximum Kvs-values, high pressure at large flow rates | body made of welded steel, CrNiMo steel | special versions available
DN
100 - 800
PN
10 - 25
p1
2 - 20 bar
Kvs
60 - 2100 m3/h
T
130 °C
连续通排气阀
Sturdy Valves of Cast Steel
EB 1.10, 1.11
For larger air volumes, e.g. on sand filters, stainless steel float and lever control the valve shut-off, EB 1.11 with external float, EB 1.20 for maximum air volumes | valve cone with soft or metallic seal | body made of GGG-40, GS-C25 | for contaminated and foaming media, available with various coating types
DN
32/15 - 100/50
PN
40
p
0 - 40 bar
Q
2440 Nm3/h
T
200 °C
Compact Standard Bleeding Valve
EB 1.12, EB 1.32
For all types of pipelines, tanks etc. | EB 1.12 of angled design, EB 1.32 of straight design (also available as pure bleeding valve), float-controlled with valve shut-off | suitable for all liquids (petrol, oil ...), thanks to soft seal especially tight-closing | completely made of deep-drawn CrNiMo steel | corrosion resistant, very lightweight and compact, clamp system | available in special materials, such as titanium, Hastelloy(R) etc.
DN
25 - 100
G
3/4 - 2
PN
16
p
0 - 16
Q
248 Nm3/h
T
130 °C
Large Sized Cast Bleeding and Venting Valve
EB 1.20
For very large flow rates / body made of GGG-40, GS-C 25 / inner parts of Cr/CrNiMo-steel
DN
80/65 - 200/150
PN
16 - 40
p
0 - 40 bar
Q
7770 Nm3/h
T
200 °C
Continuous Bleeding and Venting Valve with sight glass
EB 1.48
G
1/2
PN
16
p
0 - 16
Q
28 Nm³/h
T
130 °C
启动通排气阀
Valve for Very Large Air Volumes
EB 3.50
And high operating pressures, float-controlled, special designs available with adapted continuous bleeding and venting valve (EB 6.54) | suitable for all liquids | body made of steel, CrNiMo steel | high pressure resistant welded construction | long operational lifespan, extremely sturdy, available in special materials
DN
100 - 300
PN
40
Q
10708 Nm3/h
T
130 °C
Universal Valve
EB 3.52
Suitable for all liquids | completely made of deep-drawn CrNiMo steel | corrosion resistant, very lightweight and compact | long operational lifespan, manageable installation, available in special materials – such as seawater resistant stainless steels, easy-to-maintain owing to the clamp system – highest effectiveness with compact design
DN
25 - 100
PN
16
p
0 - 13 bar
Q
1935 Nm3/h
T
130 °C
浮球控制的冷凝疏水器
Universal Valve for Small Flow Rates
KA 2
Soft seal possible for explosive gases, for steam with manual bleeding | suitable for steam, compressed air, aerosols | completely made of deep-drawn CrNiMo steel | very lightweight, corrosion resistant to aggressive media, especially gastight | easy installation, easy and cost-effective maintenance owing to the clamp system, long operational lifespan
G
3/4 x 1/2A
PN
16
p
0 - 12 bar
Q
350 l/h
T
190 °C
Condensate Trap for Compressed Air and Gases
KA 2K
for draining of compressed air or gases | completely made of deep-drawn CrNiMo steel | very lightweight, corrosion-resistant to aggressive media, especially gastight | easy installation, easy and cost-effective maintenance owing to the clamp system, long operational lifespan
G
1/2 x 1/2A
3/4 x 1/2A
1 x 3/4A
PN
16
p
0 - 12
Q
1570 l/h
T
80 °C
Universal Valve for Larger Flow Rates
KA 2X
Soft seal possible for explosive gases, for steam with manual bleeding | suitable for steam, compressed air, aerosols | completely made of deep-drawn CrNiMo steel | very lightweight, corrosion resistant to aggressive media | easy installation, easy and cost-effective maintenance owing to the clamp system, long operational lifespan
DN
25 x 3/4A
G
1 x 3/4A
PN
16
p
0 - 13
Q
1200 l/h
T
190 °C
Universal Valve with Thermal Bleeding
KA 3
For steam with thermal bleeding, can be polished exernally for clean and ultraclean rooms | suitable for compressed air, aerosols without thermal bleeding | completely made of deep-drawn CrNiMo steel | very lightweight and compact, corrosion resistant, optimal surface characteristics | easy installation, easy and cost-effective maintenance owing to the clamp system, long operational lifespan
DN
15 - 25
G
1/2 - 1
PN
16
p
0 - 12 bar
Q
2000 l/h
T
190 °C
Universal Valve of Cast Steel
KA Axomat
No working pressure ranges, with manual or thermal bleeding or fixed continuous bleeding | suitable for steam | body made of GG-25, GS-C 25 | solid, well-proven, sturdy | extended service intervals, extremely long operational lifespan, reliable
DN
15 - 32
PN
16 - 40
Q
2700 l/h
T
200 °C
High-performance and Sturdy Steam Trap
KA Niagara
With manual or thermal bleeding or fixed continuous bleeding | suitable for steam | body made of GGG-40, GS-C 25, inner parts of CrNiMo steel | solid, well-proven, sturdy, for very high temperatures | extended service intervals, extremely long operational lifespan, reliable, well-known as a high-performance valve
DN
15 - 150
PN
16 - 40
p
0 - 40 bar
Q
193 m3/h
T
200 °C
容器内安装的浮球阀
Standard Feed Valve of Cast Steel
NV 12, 12P
NV 12P with parallel guide | suitable for liquids | body made of GG-25, GGG-40 | proven technology that requires no external energy | individual design, high functionality, high operational safety
DN
20 - 150
PN
16
p
0 - 8 bar
Kvs
2.8 - 195 m3/h
T
110 °C
Valve for Flammable Liquids
NV 36SF
overfill protection, with PTB approval, sturdy, well-proven design that is safe to operate, easy installation, requires no external energy, installation independent from the supply network at any point | body made of GS-C 25
DN
32 - 200
PN
16
p
0 - 16 bar
Kvs
11 - 230 m3/h
T
80 °C
Compact Stainless Steel Valve
NV 94
Feed or drain valve, also for closed tanks | suitable for all liquids, also aggressive ones | completely made of CrNiMo steel | sturdy technology, smooth surfaces, various sealing materials
G
3/8A - 1 1/2A
PN
16
p
0 - 8 bar
Kvs
0.5 - 21 m3/h
T
300 °C
Universal Valve
NV 98
Feed valve for open and closed tanks , available with parallel guide | suitable for all liquids, also aggressive ones | completely made of deep-drawn CrNiMo steel | smooth surfaces, various sealing materials
DN
40 - 80
G
3/8A - 1 1/2A
PN
16
p
0 - 8 bar
Kvs
0.5 - 82 m3/h
T
130 °C
止回阀
Epoxy Coated Backflow Preventer
RV 11
simple valve without mechanical parts | dampening is done by the elastomer diaphragm closing when the flow goes backward | avoids pressure surges | of low noise level | any installation position | cast body with epoxy coating in accordance with KTW recommendations
DN
40 - 400
PN
10 - 16
Kvs
25 - 2550 m³/h
T
80 °C
流量监测器
Flow Switch for Installation on a Pipeline
SW 1.10, 1.20, 1.40
Pendulum-type flow switch for horizontal pipelines, SW 1.20 with adjustable switching threshold for pipes up to ND 200 | flange C 22.8 22.8, CrNiMo steel
DN
50
for pipelines up to DN 200
PN
16 - 40
T
170 °C
Flow Switch for Installation in Pipelines
SW 6.14
With internal flag and external indicator for horizontal pipelines | suitable for all liquids | completely made of deep-drawn CrNiMo steel | acrylic glass with scale
G
1/2 - 1 1/2
PN
16
T
80 °C
冷凝水泵
Very Lightweight Condensate Pump
KH 1
Soft seal for gas tightness in explosive environments | suitable for condensates and liquids | completely made of deep-drawn CrNiMo steel | very lightweight and compact, corrosion resistant, pump requires no auxiliary energy | manageable installation, easy-to-maintain owing to the clamp system, long operational lifespan, highest effectiveness with compact design
DN
25 + 50
PN
16
Q
3430 l/h
T
200 °C
电动设定阀
Control Valve
AV 50.2
Suitable for liquids, steam, gases / body made of GGG-40, GS-C 25 | with equal-percentage characteristics
DN
15 - 150
Kvs
4 - 160 m3/h
T
200 °C
附带配件
Diaphragm Expansion Tank
AKM 200
completely in deep drawn CrNiMo steel | diaphragms made of either EPDM or FPM | maintenance-friendly due to clamp system
G
1/2
PN
10
p
0 - 10 bar
T
130 °C
Floats made of stainless steel
SR 3, 4, 7, 8
floats in various design, sizes and thicknesses | SR 3 and SR 4 for pressure vessels | connection on float rod via fork or leaded rod |SR 7 and SR 8 for unpressurised vessels
|
