Heinzinger electronic GmbH电源 高功率 高精度 HV cassettes和模块
德国Heinzinger electronic GmbH电源 高功率 高精度 HV cassettes和模块
产品系列:
High Power
Customized high performance power supplies for HIGHCURRENT and HIGHVOLTAGE
We offer high performance power supplies for currents up to 10.000 Ampere and voltages up to 300.000 Volt.
The power supplies are tuned to your requirements and so they insure the optimal interaction together with your application.
Series overview
PTN3p/PTNhp
|
PTNer
|
PNY
|
PHN/PHNhp
|
PHY
|
PCU
|
schliessen
PTN3p / PTNhp - Series
Double-stabilised linear control low-voltage power supplies
top
- Double-stabilised linear control power supply with high precision
- output current up to 5.000 Ampere
- output voltage up to 600 Volt
(for higher voltage see PHN series)
- residual ripple < 0,01% pp, (up to 0,001% as PTNhp)
- stability < 0,01% over 8h
- setting of output voltage with ten-turn potentiometer
- setting of output current with ten-turn potentiometer
- 3.5-digit digital displays for voltage
and current, analogue displays on request
- analog interface
- digital interface avalible as option
- ustained short-circuit resistant
- sense-connection
- 19" rack on columns or casters
- customized versions are possible, e.g. for 2-quadrants operation
PTN3p-datasheet (PDF)
PTNer - Series
High Performance Power Supplies with Active Energy Recovery
top
- Robust power unit based on the PTN3p series with "Heinzinger Energy Recovery"
- Integrated energy recovery that converts energy returning from the consumer back into network voltage and is fed back into the supply network
- Very good dynamic behaviour
- Minimal threshold between power units and energy recovery mode with intelligent detection of the operating mode of the consumer
- Comprehensive digital and analogue control methods
- Power unit function with integrated option "Battery characteristic curves" for recreating the behaviour of a battery
- Suited for non-stop operation, extremely reliable
- Modular design
- Galvanic separation of the consumer in energy recovery mode
- Power unit available in water-cooled version
PTNer-datasheet (PDF)
PNY - Series
SCR controlled low voltage power supplies
top
- output current up to 10.000 Ampere
- output voltage up to 600 Volt
(for higher voltage see PHY series)
- residual ripple < 0,1% pp,
- stability < 0,1% over 8h
- setting of output voltage with ten-turn potentiometer
- setting of output current with ten-turn potentiometer
- 3.5-digit digital displays for voltage
and current, analogue displays on request
- analog interface
- digital interface avalible as option
- ustained short-circuit resistant
- sense-connection
- 19" rack on columns or casters
- customized versions are possible, e.g. for 2-quadrants operation
PNY-datasheet (PDF)
PHN / PHNhp - Series
Double stabilized linear controlled high voltage power supply
top
- output voltage up to 60.000 Volt
- output current up to 40 A
- residual ripple < 0,01% pp, (PHNhp up to 0,001%pp)
- stability < 0,01% over 8h (PHNhp 0,001%)
- setting of output voltage with ten-turn potentiometer
- setting of output current with ten-turn potentiometer
- 3.5-digit digital displays for voltage
and current, analogue displays on request
- analog interface
- digital interface avalible as option
- external HV On/Off via stand-by input
- polarity reversal as option
- sustained short-circuit resistant
- 19" rack on columns or casters
- customized versions are possible, e.g. for 2-quadrants operation
PHN/PHNhp-datasheet (PDF)
PHY - Series
SCR controlled high voltage power supply
top
- output voltage up to 60.000 Volt
- output current up to 40 A
- residual ripple < 0,1% pp
- stability < 0,1% over 8h
- setting of output voltage with ten-turn potentiometer
- setting of output current with ten-turn potentiometer
- 3.5-digit digital displays for voltage
and current, analogue displays on request
- analog interface
- digital interface avalible as option
- external HV On/Off via stand-by input
- polarity reversal as option
- sustained short-circuit resistant
- 19" rack on columns or casters
- customized versions are possible, e.g. for 2-quadrants operation
PHY-datasheet (PDF)
PCU - Series
High Precision Power Supplies for Magnet Applications
top
- Extremly precise power supply for magnets
- Modular system, parallel operation to increase output power possible
- Zero-Voltage-Switching Technology
- Maximum accuracy and stability (<10ppm/8h)
- Temperature coefficient <10ppm
- Optimum ratio between power density/accuracy
- DCCT current measurement
- Programmable current ramp function
- 2-part LCD display with text indicator
- Analog (0...10V) and digital interface (RS422)
- Controller configuration/load balancing possible
- Last setting memory
- Air colling (optional water cooling)
- Triggereingang für Mess-Signal
- Trigger input for measurements signals
- Output short-circuit and open-circuit proof
- Pole-reversal unit for switching polarity optional
- Various voltage/current combinations
- Customer-specific variants
PCU-datasheet (PDF)
Highest precision
The hp devices are just as all Heinzinger power units also robust and absolutely reliable power supplies for non-stop operation. And that with improved utmost precision and least residual ripple. Even as standard versions do the hp types have a residual ripple and stability in the <0.001 % range, the temperature coefficient also lies in this range for voltage and current stabilization. Devices with even better output data up to 0.0001 % can also be realised according to customer specifications.
Series overview
PTNhp
|
PNChp
|
PHN/PHNhp
|
HNCE/HNCEhp
|
schliessen
PTNhp - Series
High precision double-stabilised linear control low-voltage power supplies
top
- Double-stabilised linear control power supply with highest precision
- output current up to 5.000 Ampere
- output voltage up to 600 Volt (for higher voltage see PHN series)
- residual ripple < 0,001% pp
- stability < 0,001% over 8h
- setting of output voltage with ten-turn potentiometer
- setting of output current with ten-turn potentiometer
- 3.5-digit digital displays for voltage and current, 4.5digit displays on request
- analog interface
- digital interface avalible as option
- ustained short-circuit resistant
- sense-connection
PTNhp datasheet (PDF)
PNChp-Series
High precision high voltage power supply
top
- switch mode HV power supply for high precision
- output voltage up to >300.000 Volt
- output current up to 10.000 mA
- residual ripple < 0,001% pp
- stability < 0,001% over 8h
- setting of output voltage with ten-turn potentiometer
- setting of output current with ten-turn potentiometer
- 3.5-digit digital displays for voltage and current, 4.5 digit displays on request
- analog interface
- digital interface 16 bit avalible as option
- external HV On/Off via stand-by input
- polarity reversal as option
- sustained short-circuit resistant
- available for the most PNC and PNC3p types
PNChp datasheet (PDF)
PHN / PHNhp - Series
Double stabilized linear controlled high voltage power supply
top
- output voltage up to 60.000 Volt
- output current up to 40 A
- residual ripple < 0,01% pp, (PHNhp up to 0,001%pp)
- stability < 0,01% over 8h (PHNhp 0,001%)
- setting of output voltage with ten-turn potentiometer
- setting of output current with ten-turn potentiometer
- 3.5-digit digital displays for voltage and current, analogue displays on request
- analog interface
- digital interface avalible as option
- external HV On/Off via stand-by input
- polarity reversal as option
- sustained short-circuit resistant
- 19" rack on columns or casters
- customized versions are possible, e.g. for 2-quadrants operation
PHN/PHNhp datasheet (PDF)
HNCE- /HNCEhp- Series
High voltage module
top
- switch mode HV module
- input voltage 24V DC
- output power up to 12 Watt
- output voltage up to 20.000 Volt
- output current up to 30 mA
- residual ripple up to < 0,005% pp, type-dependent
- stability < 0,2% over 8h
- setting of output voltage via analog interface
- setting of output current via analog interface
- external On/Off via stand-by input
- analog interface
- sustained short-circuit resistant
HV cassettes and modules
High-voltage power units for voltages up to 30,000 Volt, at outputs up to 60 Watt. The devices are available as 19" cassette units or as modules and thus are ideal for use in 19" racks or for integration in various customer environments.
schliessen
LNCE-Serie
High voltage cassette power supply
top
- switch mode HV cassette power supply
- input voltage 24V DC
- output power up to 30 Watt
- output voltage up to 20.000 Volt
- output current up to 100 mA
- residual ripple up to <0,05% pp, type-dependent
- stability < 0,05% over 8h
- setting of output voltage via analog interface
- setting of output current via analog interface
- external On/Off via stand-by input
- analog interface
- sustained short-circuit resistant
LNCE-datasheet (PDF)
NCE-Serie
High voltage cassette power supply
top
- switch mode HV cassette power supply
- output power up to 60 Watt
- output voltage up to 30.000 Volt
- output current up to 600 mA
- residual ripple < 0,1% pp
- stability < 0,1% over 8h
- setting of output voltage via analog interface
- setting of output current via analog interface
- analog interface
- sustained short-circuit resistant
NCE-datasheet (PDF)
HNCE- /HNCEhp- Serie
High voltage module
top
- switch mode HV module
- input voltage 24V DC
- output power up to 12 Watt
- output voltage up to 20.000 Volt
- output current up to 30 mA
- residual ripple up to <0,005% pp, type-dependent
- stability < 0,2% over 8h
- setting of output voltage via analog interface
- setting of output current via analog interface
- external On/Off via stand-by input
- analog interface
- sustained short-circuit resistant
|