Inline Turbidity Meters, Turbidimeters, Colorimeters, Cell Density Probes and Other UV-VIS-NIR Process Photometers.
optek's unique modular design makes it possible to adapt high performance photometric and electro-chemical sensors to virtually any process. This flexibility applies to all sensor types making optek sensors suitable for real-time measurements independent of the application, process connection or measuring location.
Our products are categorized in the following groups:
Turbidity Sensors Color and Concentration Sensors UV Absorption, Transmission and Concentration Sensors pH/ORP and Inline Conductivity Sensors
optek inline process sensors are available in either a flow through design or insertion probes.
Inline (Pipelines)
Probes (Tanks, Vessels & Pipelines)
Turbidity Sensors:
optek inline turbidity meters, lab turbidimeters, and optical density probes can be specified to measure turbidity, haze, clarity, and optical density in units of: FTU, NTU, EBC, OD, PPM, Percent and many others. Common process applications include: Filter performance and filter break monitoring, gas bubble detection, particle content and concentration, total suspended solids (TSS), interface detection, BOD, and leak detection. Specialized applications using probe sensors include: Fermentation, cell culture, cell density, biomass, dissolution, and crystallization.
Super-Low AND Medium Turbidity - Dual Technology, Absorption/Scattered-Light
TF56
Low Turbidity Monitoring & Leak/Break Detection
AF16-N
Medium to High Turbidity, Solids Concentration - NIR Absorption
AF56-N
Medium to High Turbidity Monitoring & Interface Detection
Probes (Tanks, Vessels & Pipelines)
AS16-N
Low to High Turbidity & Optical Density
ASD19
Ideal for Small Laboratory and Pilot Fermentors and Bioreactors - Autoclavable
ASD25
Ideal for Large Manufacturing Fermentors and Bioreactors
AS56-N
Medium to High Turbidity Monitoring & Interface Detection
Laboratory
DT9011
Advanced Benchtop Turbidimeter - Multi-Angle Precision Turbidity Analysis Using Nephelometric, Absorbance and Forward Scatter Technologies
Color and Concentration Sensors:
optek colorimeters, VIS-NIR concentration analyzers, and color monitors are ideal for a multitude of real-time measurements for improved process control. Installed directly in process pipelines, tanks and vessels using flow-through and probe type sensors, these reliable analyzers can be configured to measure the concentration of numerous chemicals and can be correlated to many color scales including: APHA, ASTM, Saybolt, ASBC-SRM, ICUMSA, AOCS, HAZEN and others. Typical applications include the concentration of: Bromine, chlorine dioxide, chlorine, nickel, copper, chromium, hemoglobin, chlorophyll as well as color addition and removal control, leak detection/carryover, product interface and dosing/blending control.
Inline (Pipelines)
AF26
Ultra-Low to Ultra-High Color & Concentration - Precision, Dual Wavelength
AF16-F
Low to High Color & Concentration without turbidity compensation - Single Wavelength
AF56-F
Medium to High Color & Concentration Monitoring & Interface Detection
Probes (Tanks, Vessels & Pipelines)
AS16-F
Low to High Color & Concentration
AS56-F
Medium to High Color & Concentration for Blending Control and Interface Detection
UV Absorption, Transmission and Concentration Sensors:
optek UV sensors can be effectively applied to a broad range of process applications measuring Ultra-violet absorbance, transmittance, optical density, and chemical concentrations from low parts-per-million (PPM), to high percent-levels. These UV analyzers can be calibrated non-intrusively to NIST-traceable standards. Typical UV applications include: Chromatographic separation, amino acid concentration, protein purification, OD280, TOC, SAC254 and COD (ppb), %T, detecting trace aromatics, organics, and membrane filtration control.
Inline (Pipelines)
AF45
Single Wavelength UV - Ultra-Low to Ultra-High Concentrations
AF46
Dual Wavelength - Ultra-Low to Ultra-High Concentrations
pH/ORP and Conductivity Sensors:
Offering a superior solution for biotechnology, pharmaceutical, and other ultra-sanitary applications, optek's unique PF12 allows users to install a wide variety of Ø12 x 120 mm, steam-sterilizable pH electrodes directly inline for the most demanding downstream processes. Where two or three sensors would normally be required, one optek conductivity sensor delivers linear and reliable measurements over an extremely wide conductivity range due to its patented six-electrode design.